Description
Shurflo 9300 Deep Well Solar Water Pump Kit – 230-Feet, With Pole Mount
This Solar Water Well Pumping system can pump 1.36 gallons per minute at a max of 230′, lower head distances will increase flow rate (see table below). Check out a similar kit but without the pole mount here –Â Shurflo 9300 Solar Water Pumping Kit, 230-feet Head Height
Kit Components:
- Shurflo 9300 Submersible Pump
- Shurflo 9300 series 902-100 (LCB-O) pump controller
- 2 x 80w 12v solar panels
- DPW top of pole mount
Notes:
- The solar panels must be wired in series for a 24v output. The 902-100 (LCB-O) pump controller must be mounted in a dry location.
- For water pump cable please see the following links 10/2 without ground. We recommend the 902-200 (LCB-G)controller for solar water pumping systems with a battery bank since a system with the 902-100 (LCB-O) would require an additional charge controller if a battery bank was required.
PLEASE NOTE MOUNT IS MADE TO ORDER AND SO HAS 2 WEEK LEAD TIME.
Additional Pre-designed Shurflo 9300 Solar Water Pumping Kits:
-
Shurflo 9300 Series Solar Water Pumping Kit System up to 120 feet With Pole Mount
-
Shurflo 9300 Series Solar Water Pumping Kit System up to 120 feet No Pole Mount
-
Shurflo 9300 Series Solar Water Pumping Kit System up to 230 feet No Pole Mount
Kit Contents
Array Direct Performance (24V array) | |||
---|---|---|---|
Vertical lift | Minimum solar array size | Flow rate (gpm) | Amps @ 30V |
20 | 2 x 32 watts | 1.95 | 1.5 |
40 | 2 x 32 watts | 1.90 | 1.7 |
60 | 2 x 50 watts | 1.81 | 2.1 |
80 | 2 x 50 watts | 1.76 | 2.4 |
100 | 2 x 50 watts | 1.71 | 2.6 |
120 | 2 x 50 watts | 1.68 | 2.8 |
140 | 2 x 80 watts | 1.65 | 3.1 |
160 | 2 x 80 watts | 1.63 | 3.3 |
180 | 2 x 80 watts | 1.55 | 3.6 |
200 | 2 x 80 watts | 1.52 | 3.8 |
230 | 2 x 80 watts | 1.36 | 4.1 |
Â