Description
Shurflo 9300 Series Solar Water Pumping Kit – 120-feet, NO Pole Mount
This Shurflo 9300 Series Solar Water Pumping Kit System can pump 1.68 gallons per minute at a max of 120′, lower head distances will increase flow rate (see table below). If you’d like to check out this similar kit but with a solar panel pole mount go here Shurflo 9300 Solar Water Pumping Kit – 120-Feet With Pole Mount
Kit Details:
- Shurflo 9300 Submersible Pump
- Shurflo 9300 series 902-100 (LCB-O) pump controller
- 1 x 120w 24v solar panels
Note: The 902-100 (LCB-O) pump controller must be mounted in a dry location.
For water pump cable please see the following links 10/2 without ground. We recommend the 902-200 (LCB-G)controller for solar water pumping systems with a battery bank since a system with the 902-100 (LCB-O) would require an additional charge controller if a battery bank was required.
Additional Pre-designed Shurflo 9300 Kits
-
Shurflo 9300 Series Solar Water Pumping Kit System up to 120 feet With Pole Mount
-
Shurflo 9300 Series Solar Water Pumping Kit System up to 230 feet With Pole Mount
-
Shurflo 9300 Series Solar Water Pumping Kit System up to 230 feet No Pole Mount
|
||
|
||
|
| Array Direct Performance (24V array) | |||
|---|---|---|---|
| Vertical lift | Minimum solar array size | Flow rate (gpm) | Amps @ 30V |
| 20 | 2 x 32 watts | 1.95 | 1.5 |
| 40 | 2 x 32 watts | 1.90 | 1.7 |
| 60 | 2 x 50 watts | 1.81 | 2.1 |
| 80 | 2 x 50 watts | 1.76 | 2.4 |
| 100 | 2 x 50 watts | 1.71 | 2.6 |
| 120 | 2 x 50 watts | 1.68 | 2.8 |
| 140 | 2 x 80 watts | 1.65 | 3.1 |
| 160 | 2 x 80 watts | 1.63 | 3.3 |
| 180 | 2 x 80 watts | 1.55 | 3.6 |
| 200 | 2 x 80 watts | 1.52 | 3.8 |
| 230 | 2 x 80 watts | 1.36 | 4.1 |
